From basement flooding to foundation seepage, Arrow Tight Waterproofing has protected properties statewide with industrial-grade waterproofing systems. Crews are standing by 24/7 across District of Columbia, DC.


We've spent years responding to flooded basements and seeping foundations throughout District of Columbia, DC. What we've learned is simple: most water intrusion problems trace back to three root causes — hydrostatic pressure, improper grading, and compromised foundation walls. We fix all three, not just the symptom you can see.
We're not a general contractor who does waterproofing on the side. Every job we take in District of Columbia, DC — whether it's a sump system installation, a foundation crack repair, or a full exterior waterproofing scope — is handled by specialists. No subcontracting, no handoffs, no surprises on the invoice.
Water damage rarely announces itself dramatically at first. It starts quiet — a damp smell, a hairline crack, white powder on the concrete. By the time it's obvious, you've lost weeks of containment. Here's what to catch early at any property throughout District of Columbia, DC.
That white chalky residue isn't cosmetic — it's mineral salt deposited by water that has already penetrated your foundation wall.
Horizontal cracks mean the soil outside is pushing inward against your foundation wall. This indicates active soil movement and warrants evaluation immediately.
If your basement smells earthy or musty after every heavy rain, active water intrusion is feeding organic growth — likely behind the drywall or under the slab.
The cove joint — where the floor slab meets the foundation wall — is the most common water entry point in basement systems. Staining or pooling there means hydrostatic pressure is actively pushing in.
Paint and drywall absorb moisture vapor before you can see liquid water. Bubbling or peeling in a below-grade space is almost always a moisture problem, not a paint adhesion failure.
A sump pump that cycles every few minutes — or runs non-stop — is managing a groundwater situation your current system wasn't designed for. It will burn out, and the next flood won't wait for a replacement.
Iron in your concrete doesn't rust unless water penetration has reached it. Rust staining is a reliable indicator that your foundation waterproofing envelope has been breached.
Hairline slab cracks that weep during wet weather indicate hydrostatic pressure building under the slab. Left alone, that pressure will widen the cracks and lift sections of the floor.
Every moisture problem has a different source. We identify yours specifically before we quote anything — then we deploy the right system, not the most expensive one.
Interior drain tile systems collect groundwater at the footing level before it enters your living space. We saw-cut the slab perimeter, excavate to the footing, install gravel-bed perforated pipe, and tie it into a sump system with battery backup.
Our sub-slab drainage systems use schedule 40 perforated PVC pipe in a stone bed, designed to handle high-volume water tables.
📞 Get a Free Drainage Quote →Full exterior waterproofing involves exposing your foundation to the footer depth, applying a crystalline or elastomeric waterproofing membrane, installing a geocomposite drainage mat, and placing exterior drain tile at the footing — the same specification used in new commercial construction.
This approach solves the problem at the source: water never reaches your interior wall surface.
📞 Schedule an Exterior Assessment →Poured concrete foundation cracks are repaired from the interior using high-pressure polyurethane or epoxy injection — the appropriate chemistry depends on whether the crack is actively leaking or dry. Polyurethane foam expands into wet, actively leaking cracks and cures flexible. Epoxy injection is used in dry cracks where structural bond restoration is the goal.
For concrete block foundation walls showing horizontal cracking or inward bowing, we pair crack repair with carbon fiber reinforcement straps anchored at the floor and rim joist.
📞 Get a Crack Injection Estimate →Crawl spaces are the most overlooked moisture source in residential structures. An unencapsulated crawl space — even one that never floods — pumps humid air into your living area through the stack effect, raising indoor humidity, feeding mold growth in floor joists, and accelerating wood rot in your subfloor structure.
For crawl spaces with active water entry, we install a perimeter drain channel, route it to a sump, and then encapsulate over the drainage system.
📞 Schedule a Crawl Space Inspection →A sump pump is only as reliable as its installation and backup plan. We install primary pumps — typically 1/2 to 3/4 HP cast iron submersibles with a minimum 10-year rating — alongside battery-operated backup systems that activate automatically when your primary pump fails or power goes out.
Sump pump replacement is one of the most time-sensitive repairs in waterproofing — a failed pump during a heavy rain event means an immediate flood.
📞 Get a Sump System Quote →Basement window wells are one of the most underestimated water entry points in residential waterproofing. When the well drain becomes clogged or the well itself is sized incorrectly for your roof drainage load, water pools against the window frame and enters through the sill or the adjacent block wall.
Window well covers are a maintenance measure, not a waterproofing solution — but paired with proper drainage installation.
📞 Book a Window Well Assessment →We're not going to tell you we're the cheapest or the biggest. We're going to tell you what we do differently — and why it leads to better outcomes for your property and your wallet long-term.
Every estimate begins with a physical inspection of every visible moisture entry point.
The waterproofing membrane we apply to your foundation is the same specification used on commercial buildings — a 60-mil rubber barrier.
Every technician on our crews is a direct employee of Arrow Tight Waterproofing, insured under our policy, and trained to our installation standards.
We quote a fixed scope and a fixed price before any work begins.
Our drainage system installations carry a written warranty against water intrusion through the protected area for the life of the system.
Our emergency dispatch protocol means a technician assesses the situation within 60 minutes of your call in most of our District of Columbia, DC service territory.
Call +1-866-476-1348 or fill out our contact form. A live dispatcher answers around the clock and routes a technician based on availability and urgency.
A certified technician visits your property, conducts a full moisture inspection including thermal imaging and meter readings, identifies every active entry point, and documents the drainage pattern. No high-pressure sales tactics — just data.
We present a written, itemized proposal on-site or within 24 hours of the inspection. Fixed price, fixed scope, no open-ended line items. You review it, ask questions, and authorize in writing before any work begins.
{Our crew completes the installation to the approved scope. On completion, we conduct a post-installation moisture check, walk you through the system, and provide the written warranty documents registered to your property address.|Installation is completed by our direct-employee crew. We clean up the jobsite, verify pump function and discharge routing, take post-install moisture readings, and hand you the warranty documentation before we leave.}
Our crews are stationed throughout District of Columbia, DC and ready to assess your property. Free inspection, written estimate, no obligation. Call now — we answer 24/7.
📞 Call +1-866-476-1348 — Free Estimate"The crew showed up within 3 hours of my call at 9 PM. I had water coming in through a crack in my poured wall at the floor joint — had been watching it for two seasons and finally called when it started spreading. They installed an interior drain system along two walls and a new sump pit. The work took two days. Three major rain events since then — completely dry. Worth every dollar.That kind of result speaks for itself."
"I've had two other companies look at my foundation crack before these guys. Both gave me vague proposals and neither one could tell me exactly where the water was coming in. Arrow Tight Waterproofing came out, brought a thermal camera, and showed me on screen exactly where the moisture was concentrated. The polyurethane injection they did has held for 18 months with zero seepage.That kind of result speaks for itself."
"I bought a house in District of Columbia, DC knowing it had a moisture issue in the crawl space — previous owners had put down a thin plastic sheet that was doing nothing. Arrow Tight Waterproofing encapsulated the entire crawl space with a 20-mil liner, sealed the vents, and installed a dehumidifier. Within two weeks my downstairs floors stopped feeling cold and damp and the musty smell completely disappeared.That kind of result speaks for itself."
"We had a window well that flooded every time we got more than an inch of rain. The fix was a regraded well with a perforated pipe tied into our existing interior drain. The whole job took one day. The crew was professional, cleaned up completely, and the well has handled every storm since without an issue.That kind of result speaks for itself."
"Called Arrow Tight Waterproofing after my sump pump failed during a storm and I had 4 inches of water on my basement floor. They answered at midnight, arrived within an hour, and had a temporary pump running within 20 minutes. That was 8 months ago — I've had 6 rain events including one significant storm and the basement has stayed dry.I'd recommend them to anyone dealing with the same problem."
"As a property manager overseeing several buildings in District of Columbia, DC, I've worked with a lot of waterproofing contractors. Arrow Tight Waterproofing is the first that showed up to the initial walk with a written inspection checklist and completed it on-site before quoting. Their exterior membrane on the building we had done 3 years ago is holding perfectly with zero callbacks.That kind of result speaks for itself."

We've built our service infrastructure across District of Columbia, DC around regional crew staging rather than a single central office — which means your technician is driving a short distance to your property, not hours. Coverage includes urban cores, suburban communities, and rural properties throughout District of Columbia, DC.
Our statewide team handles everything from single-family residential basements to commercial foundations. If you're in District of Columbia, DC and have a water intrusion problem, we service your area. Call +1-866-476-1348 to confirm availability — it's almost certainly covered.
📞 Schedule Your Free On-Site Inspection